How To Record Your Meeting In Zoom?

How To Record Your Meeting In Zoom?

  • It’s possible to record Zoom meetings from the desktop and mobile apps by clicking the “Record” button at the bottom of the screen.
  • However, you’ll only be able to record the Zoom meeting if the host or meeting organizer gives you permission.
  • If you’re the host, you can set this permission by going to the Settings page on the Zoom website.

A Zoom meeting can easily be recorded and others are permitted to do so.

For people who did not attend the meeting live, it could be extremely helpful. It’s also perfect if the meeting was really long, and later you have to return to those segments.

However, you will need permission to do this before you can document a zoom conference. And only the host, who wants to make changes in its settings in advance, may grant permission.

Here is an example of how to film a zoom meeting with the Mac and PC desktop app or the iPhone and Android smartphone app as well as a guide to capturing allowance if you’re the hosting device.

How to record a Zoom meeting in the desktop app

Before you start recording, you’ll want to make sure you save the file to the appropriate folder on your desktop. Click the gear icon on the homescreen to open your settings, where you’ll find a “Recording” tab on the left hand side. Zoom should automatically create a documents folder, but you can change this location by clicking the drop-down menu if you wish.

image4 record
Make sure to save your recordings somewhere you can find them. 

1. Once you’ve joined a call, click the “Record” button at the bottom of the screen. If this toolbar disappears, move your cursor for the menu to reappear. This button won’t appear at all if your host hasn’t allowed recording.

image5 record
Click “Record.” 

2. Once you’re recording, you’ll see a small “Recording…” label in the upper-left corner. You can use the small pause and stop buttons that have appeared — or use the corresponding buttons that have replaced “Record” at the bottom. 

image6 record
You can control the recording from these buttons. 

3. If you pause a recording, the label in the upper left-hand corner will change to red and read “Recording Paused” until you resume.

4. Click either “Stop” option to end the recording. Depending on your computer settings, a small pop-up may appear that reads, “The recording file will be converted to mp4 when the meeting ends.”

5. Your recorded video will be saved to your computer, and can also be found in the “Recorded” tab in the “Meetings” section of the app. You can rename these files as you wish and send them to others via email. Some versions of the Zoom app will also save the audio and video separate from one another, so you can send both or only one feed.

Enabling local recording

Account

  1. Sign in to the Zoom web portal as an administrator with the privilege to edit account settings.
  2. In the navigation menu, click Account Management then Account Settings.
  3. In the Recording tab, navigate to the Local Recordingoption and verify that the setting is enabled.
  4. If the setting is disabled, click the toggle to enable it. If a verification dialog displays, click Turn On to verify the change.
  5. (Optional) If you want to make this setting mandatory for all users in your account, click the lock icon, and then click Lock to confirm the setting.

Group

  1. Sign in to the Zoom web portal as an administrator with the privilege to edit user groups.
  2. In the navigation menu, click User Management then Group Management.
  3. Click the name of the group, then click the Settings tab.
  4. In the Recording tab, navigate to the Local Recording option and verify that the setting is enabled.
  5. If the setting is disabled, click the toggle to enable it. If a verification dialog displays, click Turn On to verify the change.
    Note
    : If the option is grayed out,  it has been locked at the account level, and needs to be changed at that level.
  6. (Optional) If you want to make this setting mandatory for all users in this group, click the lock icon, and then click Lock to confirm the setting.

User

  1. Sign in to the Zoom web portal.
  2. Click Settings.
  3. In the Recording tab, navigate to the Local Recording option and verify that the setting is enabled.
  4. If the setting is disabled, click the toggle to enable it. If a verification dialog displays, click Turn On to verify the change.
    Note: If the option is grayed out, it has been locked at either the group or account level, and you will need to contact your Zoom administrator.

Starting a local recording

The host must record the meeting or grant the ability to record to a participant.

  1. Start a Zoom meeting as the host.
  2. Click the option to Record.
  3. If there is a menu, select Record on this Computer.
    Hosts will see the following recording indicator in the top-left corner while recording is active.

    Participants will see the following indicator in the top-left cornerwhile the recording is active.
  4. Click Participants to see which participants are currently recording.

    Note: Dial-in participants will hear a message informing them that the meeting is now being recorded unless disabled by the host.
  5. After the meeting has ended, Zoom will convert the recording so you can access the files.
  6. Once the conversion process is complete, the folder containing the recording files will open.
    Note: By default, the audio/video file (MP4) will be named Zoom_0.mp4. The audio only file (M4A) is named audio_only.m4a.

Note:

  • If the meeting unexpectedly shuts down or if the conversion process is interrupted, the recording files could become corrupted and non-recoverable. Restarting or shutting down your computer, putting the hard disk to sleep, or closing your laptop will interrupt the conversion process.
  • If the conversion process is not successful after the meeting has ended, you can try to convert the files again by navigating to the recording location and double clicking the recording files.
  • You can record the meeting in different layouts including Active Speaker, Gallery View, and shared screen.

Stopping or pausing a local recording

During a Zoom recording, a participant can Stop or Pause the recording. If a participant stops the recording and starts it again, a new video file will be created for the next recording segment. If a participant pauses the recording and starts it again, Zoom will record to the same video file for the recording segment.

  1. After a recording has been started, click Pause or Stop Recording at the bottom.

    The recording can also be stopped or paused by clicking the indicator in the top left corner.
  2. When a recording is paused, the following indicator will be displayed in the meeting.
  3. To resume the recording, click Resume Recording at the bottom

    The recording can also be resumed by clicking the indicator in the top left corner.
  4. After you stop the recording, you can access the local recording files on your computer.

Assigning recording privileges to a participant

  1. In a Zoom Meeting click on Manage Participants.
  2. In the Participants menu navigate to the participant who will be granted recording privileges. Click More next to their name.
  3. Select the option to Allow Record.

    The participant will receive the following notification:
  4. When a participant is recording, the participant menu will display a recording icon next to the participant’s name.
  5. To disable the participant’s ability to record, click More next to the name, then click Forbid Record.

    The participant will receive the following notification:

Changing local recording settings

To change local recording settings in the Zoom client:

  1. Open the Zoom client and click Settings.
  2. Click the Recording tab.
    This will open your recording options that you can change using the client.

    Note: Setting the default location to a cloud syncing folder (such as Dropbox, Google Drive, or One Drive), an external drive, or network storage device may cause issues with saving and converting the local recording. Zoom strongly recommends keeping the default location on a local drive for recordings.

Recording multiple audio files

When recording locally, the host can record all participants’ audio streams as separate audio files, one file for each participant. To enable this option:

  1. Open the Zoom client and click Settings.
  2. Click the Recording tab.
  3. Enable Record a separate audio file for each participant
  4. Record and save the meeting to your computer.
  5. Once the meeting is over and the recording has processed, open the recording folder. 
  6. Within the folder, open Audio Record.
  7. Once in the Audio Record folder, each participant’s audio track will be listed as its own file in with the file name ending in the participant’s name.

How To Record Your Meeting In Zoom?

Rajat Singhhttps://bioinformaticsindia.com
Rajat Singh is the chief Author at Bioinformatics India, he has been writing for the past 3 years and has a special interest in SEO, Technology, Health, Life Sciences and gaming.

Get in Touch

Comments are closed.

Related Articles

Get in Touch

229FansLike
544FollowersFollow
75FollowersFollow
55FollowersFollow
243SubscribersSubscribe

Subscribe to our newsletter

To be updated with all the latest news, offers and special announcements.

Latest Posts